Thanks for your site, very useful.

I have a fault on a Carver Fanmaster, Something tripped while running on 240v. It still works on gas but only blows cold on electric. Is there a trip switch somewhere?

Thanks
Rob

Rob

Yes there is,as you look down at the fanmaster from the top there is a trip button to the left.

You carn't see it but if you put your hand down the side of the unit there is a plastic cover that sticks out, (no. 3 in diagram) ,in the middle of that is an indent that can be pressed in.

This intern presses the trip button, unless you have an older fanmaster which has a thermal cut out.If you have the indend won't move and you have to fit an update kit.

Darren